1, mud training: from the mining area to take porcelain stone, water-powered stone, wash, remove impurities, precipitation made of brick mud. Then mix the mud with water, remove the slag, rub with hands, or tread with feet, squeeze out the air in the mud, and make the water in the mud uniform.
2. Drawing: the mud ball is thrown in the rotary center of the pulley, and the rough shape of the blank body is drawn with the bending and stretching of the technique.
3. Billet: the appearance of the impression is cut by the billet body arc, the semi-dry billet is overlaid on the mold, evenly beat the billet body wall, and then release the mold.
Billet: put the billet on the barrel of the pulley, turn the wheel, cut with a knife, and make the billet body thick. 4.
4, glaze: the ordinary round mouth using dipping glaze (the billet immersed in the glaze basin, when the mouth along with the glaze surface is immediately put forward) or swing glaze (the glaze slurry into the billet shake, so that the upper and lower glaze evenly, and then quickly dump the excess glaze slurry), carving (relative to the "round", "round" refers to through the pull billet
5, the method of forming round vessels, such as bowls, plates, dishes, etc. And the vessels with more complex forming process, such as bottles, zungs, POTS, POTS, etc., are called "diamonders") or large round vessels are used to blow glaze (the method is to cover the bamboo tube with fine yarn, dip the glaze and then blow with the mouth, so repeated many times, the blank surface can get a glaze layer of uniform thickness).
